Shuode - Leading Custom Polyurethane Foam and Building Adhesive Manufacturer.
Product Feature
Contains pesticide that protects foam from attack by mice
and other pests.
Excellent adhesion & filling capacity and high thermal value.
Conforms to fire class B3 according to DIN4102-1.
Mold-proof, water-proof and over paintable.
· Good effect of rodent and insect control: can effectively drive away mice, cockroaches, ants and other common pests, reduce the damage of rodent and insect pests to buildings and articles.
· Excellent sealing performance: after spraying, it will expand and solidify quickly, fill all kinds of gaps and holes, form a sealing barrier to prevent pests from entering, and also play a role in waterproofing and dustproof.
· Excellent thermal insulation performance: with good thermal insulation performance, can reduce the energy consumption of buildings, save energy.
· Convenient construction: single-component design, no on-site mixing, easy to use. Just shake the tank evenly, install on a special spray gun, and can be directly sprayed to the parts to be treated.
· Strong bonding force: can firmly adhere to concrete, wood, metal, plastic and other materials on the surface, not easy to fall off.
· Preparation before construction: Clean the dust, oil and debris on the surface to ensure that the surface is clean and dry. For large gaps or holes, you can first fill them with other materials to reduce the amount of foam used.
· Operation steps: Before use, shake the canister up and down for at least 60 seconds to ensure the material inside is evenly mixed. Invert the canister and connect it to the spray gun's threaded port. Rotate to open the flow valve, adjust the flow rate, and then start spraying. When spraying, aim the spray gun at gaps or holes, maintaining an appropriate distance and angle to ensure foam fills them evenly. Typically, spray until you reach half the desired filling volume, as the foam will expand further during curing.
· Post-processing: After the foam has solidified (usually about 10 minutes for surface drying, and the full drying time varies depending on environmental temperature and humidity), use a small knife or saw to remove excess foam and level the surface. If you need to enhance the protective effect, apply a layer of insect repellent paint or cover with a protective net on the foam surface.
• To keep all kinds of pests and rodents away from our habitats.
• Filling and sealing of especially wider gaps, joints and cavities.
• Fixing and insulating of door and window frames.
• Filling of penetrations in walls.
• Insulating electrical outlets and water pipes
· Building exterior wall and roof: used to fill the gaps and holes of the exterior wall and roof, prevent rodents and pests from entering the room, and at the same time play a role in heat preservation and insulation and waterproofing, improve the energy saving effect and overall performance of the building.
· Window frame: seal the gap between the window frame and the wall, which can not only prevent pests from entering, but also enhance the sealing of the window and improve the sound insulation and heat insulation effect.
· Pipe through the wall: Fill the gap between the pipe and the wall or floor to prevent rodents and pests from entering the room along the pipe, but also can play a role in fire blocking.
· Industrial plant and warehouse: suitable for the wall, roof and floor gap treatment of industrial plant, warehouse and other places, to protect equipment and goods from damage caused by pests and rodents.
· Home decoration: In home decoration, it can be used to fill the gaps in walls, floors, furniture and other parts, prevent the breeding of pests and rodents, and also play a certain sound insulation and thermal insulation effect.
Storage conditions: The product should be stored in a cool place with a temperature of + 5℃~+35℃, avoid direct sunlight and high temperature environment, away from fire source and flammable materials.
Safety: the construction should be carried out in a well-ventilated environment, and smoking is prohibited. Operators should wear protective gloves and work clothes to avoid skin and clothing sticking to wet foam. If accidentally inhaled or touched eyes, medical attention should be sought immediately.
Empty can treatment: Do not puncture or put the empty can into fire after the product is used up, nor should it be recycled and filled. It should be properly treated according to relevant regulations.
Related Products
Do you have any questions?
Contact us now.
If you have questions, write to us. Just tell us your requirements, we can do more than you can imagine.
QUICK LINKS
PRODUCTS
CONTACT US
Contact Person: Monica
Tel: +86-15021391690
E-mail: monica.zhu@shuode.cn
WhatsApp: 0086-15021391690
Address: CN , Songjiang , Shanghai, , Room 502, Lane 2396, Rongle East Road